Keeper Bar Seals
Wire cables that secure the hasp and wrap around the locking rods of a cargo container or trailer door offer more security than hasp seals alone.
For improved security, include adhesive security seals on any door hinges.
For very high security applications, hardened steel locking bar barrier seals that span both keeper bars provide both a major theft and tamper deterrent as well as a security seal that is extremely difficult and time-consuming to remove.
Cable Seals for Cargo Containers, Trailers, and Hasps
Cable seals consist of a cable and a locking mechanism permanently connected to one end of the cable, allowing the other end of the cable to be fed through a hasp or wrapped around a bar, and then back into the locking mechanism to create a closed and secure loop. After the locking mechanism is engaged, the cable seal can only be removed with a cable or bolt cutter.
Adjustable cable seals allow the cable to be positioned in the locking mechanism at varying lengths in order to remove unneccssary slack. Fixed-length cable seals are not adjustable, and may need to be routed around keeper bars multiple times in order to eliminate slack.
Shipments that cross international borders usually require a seal which is rated as "high security." To qualify as a high security seal and comply with ISO 17712, the cable seal diameter must be a minimum of 3.5mm; this is the minimum cable diameter required to pass the shear test of ISO 17712. LidunHologram's certificate of conformance for the ISO 17712:2010 standard for cable seals is available here.
All of our cable seals are manufactured in facilities that are C-TPAT compliant. All of our cable seals feature serial numbers for an additional level of security.
Typical Application Photos
Recommendations
Barrier Seals for Cargo Containers and Trailer Doors
Barrier seals provide the maximum protection for shipping cargo via trucks and containers. Barrier seals are installed on the keeper bars of the shipping container doors, across the seam where the two doors meet, securing both doors. They are easy to install and require no special tools for installation, however they are very difficult to remove.
The barrier seals resist physical attacks from saws, cutting sheers, bolt cutters, levering by crowbar, impact by hammer, etc. These seals can only be removed using a cutting wheel, which normally takes about 20 minutes. Barrier seals are a one-time use product. For added security, all of our barrier seals have matching serial numbers on key components.
Typical Application Photos
Recommendations
Search By Application
From the list of applications below, click on any application to display possible solutions and product recommendations that may meet your needs.
Or, to filter the list of applications, begin typing a keyword in the box.
