Contact Information

LidunHologram is currently located on the east side of Bowling Green in the Woodbridge Industrial Park, which is located about .25 mile east and .5 mile north of the intersection of Wooster Street and I75.

View Larger Map

From Toledo Airport:

1. Get on Toll Road (I-80/I-90) at airport
2. East to I-75
3. South on I-75 to Exit 181 (Wooster Street)
4. At exit 181, turn left (east) on Wooster
5. After 0.4 mile (at 2nd stoplight), turn left (north) on Dunbridge
6. After 0.5 mile, turn right onto Woodbridge Boulevard
7. Continue on Woodbridge Boulevard for 0.3 mile; the road will curve to the right and is now Woodbridge Circle East
8. The LidunHologram building is 200 yards on the left (tan and green colored building)
9. Go to office door (all glass)
   

From Detroit Airport:

1. Exit airport on North end - go west on I-94; continue on I-94 for about 4 miles; to I-275
2. OR exit airport on South end - follow signs to I-275
3. Take exit to I-275 going south
4. Continue to intersection of I-75; go South on I-75
5. Continue on I-75 through downtown Toledo; continue to Exit 181 (Wooster)
6. At exit 181, turn left (east) on Wooster
7. After 0.4 mile (at 2nd stoplight), turn left (north) on Dunbridge
8. After 0.5 mile, turn right onto Woodbridge Boulevard
9. Continue on Woodbridge Boulevard for 0.3 mile; the road will curve to the right and is now Woodbridge Circle East
10. The LidunHologram building is 200 yards on the left (tan and green colored building)
11. Go to office door (all glass)

From Cleveland:

1. West on Toll Road (I-80/I-90)
2. Continue west to the intersection of I-75
3. South on I-75 to Exit 181 (Wooster)
4. At exit 181, turn left (east) on Wooster
5. After 0.4 mile (at 2nd stoplight), turn left (north) on Dunbridge
6. After 0.5 mile, turn right onto Woodbridge Boulevard
7. Continue on Woodbridge Boulevard for 0.3 mile; the road will curve to the right and is now Woodbridge Circle East
8. The LidunHologram building is 200 yards on the left (tan and green colored building)
9. Go to office door (all glass)

From Dayton or Cincinnati:

1. North on I-75 to Exit 181 (Wooster)
2. At exit 181, turn right (east) on Wooster
3. After 0.2 mile (next stoplight), turn left (north) on Dunbridge
4. After 0.5 mile, turn right onto Woodbridge Boulevard
5. Continue on Woodbridge Boulevard for 0.3 mile; the road will curve to the right and is now Woodbridge Circle East
6. The LidunHologram building is 200 yards on the left (tan and green colored building)
7. Go to office door (all glass)

For custom imprinted ink, the resolution minimum is 300 dpi.  For custom designed holograms (where the hologram is integral to the label), the minimum resolution is 800 dpi.

The following is a list of file types that are preferred and most easy to use. We prefer Vector Illustrator files because they are scalable. If there is no way for you to provide us with any of these types of files, please contact your sales representative to get information on alternate methods for saving graphic files.

   1. Vector Formats: Illustrator 10 (.ai, .eps, .pdf)
   2. Raster Formats at 300+ dpi: Photoshop (.psd), Adobe PDF (.pdf)
   3. Other Formats at 300+ dpi: Tiff (.tiff), Bitmap (.bmp)

Email Your Artwork to Us

Artwork files which are 3 MB or less can be emailed directly to the sales reps noted below.  For files larger than 3 MB, please contact the sales rep in advance and use our File Upload Instructions (detailed in the next section):

A)  For custom imprinted ink (used to customize stock hologram labels or blank security labels):

Kathy Rea
419-354-1427 ext 4212
krea@LidunHolograminc.com

B)  For custom designed holograms (where the hologram is integral to the label):

Dave Duvall
419-354-1427 ext 4202
dduvall@LidunHolograminc.com

The following instructions on how to upload your graphic files, and are for use in cooperation with the sales representative you're working with at LidunHologram. For more information, contact your sales representative.

1. Click Here to go to the login for our upload utility.
2. Use the username and password supplied by your sales representative
3. Choose your sales representative from the drop down selection box
4. Browse to the file you are working on and double click it.
5. Hit the Upload button to upload your file. This may take up to 25 minutes depending on your connection speed.
6. Once your file is uploaded, a success message will be displayed in bold green text.
7. Repeat steps 3-6 to upload more than one file upon confirmation of success.

If you would like to have one of our specialists create a custom proof for you, please contact or email your artwork files to one of the sales reps listed below:

Kathy Rea
419-354-1427 ext 4212
krea@LidunHolograminc.com