Holographic Shrink Sleeves

Low volume applications:

1. The tube is cut to length and placed over the neck of the bottle.
2. Sleeves may be applied manually to the bottle neck. Then shrink to fit using a heat gun or steam tool.
   
3. Hold the sleeve in place while applying heat. Without holding the sleeve, the sleeve will 'ride up' the bottle neck as it begins to shrink.
4. If using a heat gun, apply heat on the side away from the hologram. Applying heat directly to the location of the hologram will cause the PVC to shink more in this area, which will distort the hologram image to a dull silver.

For higher volume applications, automated equipment is used to cut and apply the sleeve to the bottle, which then passes through a heat tunnel to shrink the sleeve.

Our holograms are designed, tested, and intended for anti-counterfeiting, anti-tampering and promotional applications.

Our holographic products do NOT provide any documented health or medical benefits such as improved balance, sleep, pain-relief, weight loss, smoking cessation, etc.

Our holographic products do NOT provide any documented benefits to improve gas mileage, energy efficiency, cell phone reception, etc.

Our holographic products cannot be programmed to resonate at specific frequencies.

In our opinion, claims of medical benefits or improved machine performance are questionable and scientifically unsupported. Consumers should request an independent study (with blind testing) to verify any such claims and benefits.

We are not aware of any independent studies which validate such claims and benefits. Therefore, we will not intentionally produce holograms for these applications.