High Security Hologram Labels (FIPS)

1. Holo-Guard labels are recommended for conventional surfaces, such as bare/painted metal, smooth plastics, etc.
2. Ultra-Guard labels are recommended for difficult surfaces such as low energy plastics, textured surfaces, CARC paint, powder-coated paint, etc. This is the best performing tamper evident label we produce.
3. We offer free samples for testing. We recommend testing prior to placing an order.
4. Our FIPS security labels are suitable for indoor applications for at least 5 years and outdoor applications for up to 2 years.

Choosing Label Size and Shape

1. If wrapping the hologram label over a radius corner (minimum 0.25 inch radius), use a long and narrow rectangle shape.
2. If wrapping the hologram label over a square corner (one change in direction), the rectangle label requires a perforation. Locate the perforation at the corner edge.
3. If wrapping the rectangle label around complex shapes (multiple edges or corners), the label requires a perforation located at each change of direction. Locate a perforation at each change of direction.

Our high performance holograms include:

• A stock hologram image to combat counterfeiting.
• A high-strength adhesive, which bonds to most surfaces and resists attack from chemicals or extreme temperatures.
• A robust tamper evident security feature.
• The unique serial number (and optional custom imprint) is protected with a clear top lamination for added durability and security.

Cleaning the surface for optimum adhesion is an important aspect of FIPS applications. This applies to passing the initial test and for application of the labels in production.

For optimum adhesion, surfaces must be cleaned with alcohol to remove surface contaminants before affixing the label. For added convenience, we offer optional alcohol cleaning kits.

Although our FIPS labels have been tested and approved for many applications, each new FIPS application will be tested again by your independent testing lab. We offer free sample labels for testing prior to ordering.

Please call if you have any problems achieving acceptable results with our FIPS labels to pass the independent testing.

If you need contact information for independent testing labs who specialize in FIPS certification, please contact us. We will provide contact info for at least two companies for you to evaluate.

• Certificate of Compliance (pdf document)
• Typical FIPS 140-2 Application
• Typical Applications
• Registry of custom imprints
• Specifications & Intended Use
• General Directions of Use
• Application Tips
• Trouble Shooting Guide
  

1. No changes to the hologram stickers as shown on this page.
2. Payment with a validated credit card.
3. Order quantity is below 10,000 stickers

We offer an optional alcohol cleaning kit. Before applying labels, use alcohol pads to remove surface contaminants which can interfere with optimum adhesion. Also, use to clean up adhesive residue remaining after a tamper evident label is removed.

Click here to learn more and buy online

Our holograms are designed, tested, and intended for anti-counterfeiting, anti-tampering and promotional applications.

Our holographic products do NOT provide any documented health or medical benefits such as improved balance, sleep, pain-relief, weight loss, smoking cessation, etc.

Our holographic products do NOT provide any documented benefits to improve gas mileage, energy efficiency, cell phone reception, etc.

Our holographic products cannot be programmed to resonate at specific frequencies.

In our opinion, claims of medical benefits or improved machine performance are questionable and scientifically unsupported. Consumers should request an independent study (with blind testing) to verify any such claims and benefits.

We are not aware of any independent studies which validate such claims and benefits. Therefore, we will not intentionally produce holograms for these applications.