eTracker Bar Code Labels
The bar code labels on this webpage are designed and tested to be compatible with the storage etracker system. These durable labels are designed to provide years of service in outdoor conditions. The bar code is laminated with a matte film, which minimizes scanning errors from reflected sunlight.
The labels feature an outdoor-grade adhesive which is suitable for outdoor temperatures ranging from -50F to +200F. When initially applied, the surface should be clean and dry and the temperature at least +5F.
To replace damaged labels, replacement labels are available in packages of 10 labels.
1.) Long Range Labels, 2.5 in x 6 in, BSS-2560$150 set up/order + $.40 per label Produced with your custom serial number range and featuring a 128 bar code, these labels can be scanned from a distance of up to 10 feet when using the etracker software and scanners. The label size is 2.5 x 6.0 inch and sold in increments of 250 labels. We will make any quantity in increments of 250 labels; quantities shown below are typical.
Replacement Labels: $2.00/label |
|||||||||||||||||||||||||||||||||||||
 |
2.) Short Range and Lock Label, 1.5 in x 0.5 in, BSS-1505$150 set up/order + $.05 per label Produced with your custom serial number range and featuring a 128 bar code, these labels are designed to fit on a typical lock. The label size is 1.5 x 0.5 inch and sold in increments of 250 labels. We will make any quantity in increments of 250 labels; quantities shown below are typical.
|
||||||||||||||||||||||||||||||||
