| Tamper Evident Feature: |
Tape is applied to a clean,
dry surface. It is designed to seal opposing flaps
of a corrugated carton. If the taped seam is slit open and re-sealed, the printed diagonal lines will be very difficult to re-align and/or there will be a small gap between the diagonal lines. This is a single use item. |
| Application: |
Designed for application on corrugated cartons by hand or automated equipment. |
| Performance: |
See temperature limitations below |
| Printing: |
White background; Red: PMS186C |
| Tamper Message: |
NONE -- tampering is indicated by the inability to re-align the printed diagonal lines |
| Materials: | |
| Label Material: |
2 Mil. Polypropylene Film |
| Adhesive: |
Permanent acrylic, water based emulsion |
| Liner: |
None, Tape is self-wound. |
| Recommended Application: | Apply to clean, dry corrugated
carton Use firm finger or hand pressure to enhance adhesion Allow 1 hour curing time after application. Minimum Application Temperature: +40F Service Temperature range is -40F to +200F Test under end-use conditions to determine serviceability |
| Physical: |
Tape comes on self-wound rolls |
| Width: |
2.0 inch |
| Core: |
3.0 inch ID |
| Length: |
330 feet per roll or 3000 feet per rolls |
| Weight/roll: |
|
| Package: |
|
| Weight/carton: |
|
| Storage: |
Recommended Storage Temperature
is 50 to 80 degrees F Minimum shelf life is 1 year |
