Plastic Adjustable Security Seals Specifications

General Specifications

Installation Instructions:

Thread the strap through the side of the opening marked ENTER
Push/pull the strap through the locking mechanism
For the MS-A1 and MS-A2, use the tightening tool to assist pulling the strap. Do not overtighten.
For sealing bags (using MS-A1, MS-A2 or MS-A3), cinch the strap tightly to assure the nail grips are embedded into the bag material
Removal:
- MS-A1 & MS-A2: use side tear-tab to remove manually (no tool required), or cut with wire cutters
- MS-A3: use side tear-tab to remove manually (no tool required), or cut with scissors
- MS-A4: break manually (low break strength) or cut with scissors
This is a one time use product, which can be recycled. The MS-A1 and MS-A2 is all plastic (no metal). For the MS-A3 and MS-A4, the locking
mechanism contains metal; trim the plastic as needed if the metal cannot be recycled with the plastic.

Intended Use

Plastic seals are used to mechanically secure a variety of containers. Typical applications include truck doors, trailer doors, railcar doors, totes, valves, coin bags, inner drum bags, crime scene evidence storage bags, and any container with a hasp or loops.

Detailed Specifications

MS-A1 MS-A2	Color: Orange Serial number: Unique number in black ink Bar code: NONE Material: Nylon Nail Grips to Seal Bags: YES Additional Tagging Device: Yes, strap Overall Size: 12.0 inch long x 1.125 inch wide Strap Cross Sectional Area: .25 inch x .125 inch Usable Strap Length: 7.5 inch Configuration: Sold in bags of 100 Tightening Tool: One included with each bag Removal: Use side tear-off tab (no tool needed), or cut with wire cutters Weight: MS-A1: 1.5 lb/bag; MS-A2: 1.7 lb/bag Optional Hologram Image & Color: Original Authentic pattern / Silver Optional Custom Imprint on Hologram: 1 color (Black, Red, Green, or Blue)
MS-A3	Color: Yellow Serial number: Unique number in black ink Bar code: YES, 128 symbology Material: Polypropylene Nail Grips to Seal Bags: Yes Additional Tagging Device: Yes, hole Overall Size: 21.0 inch long x 1.20 inch wide Strap Cross Sectional Area: .11 inch (3 mm) diameter Usable Strap Length: 16.5 inch Configuration: Sold in bags of 100 Tightening Tool: NONE, Not Required Removal: Use side tear-off tab (no tool needed), or cut with scissors Weight: MS-A3: 1.5 lb/bag
MS-A4	Color: White Serial number: Unique number in black ink Bar code: YES, 128 symbology Material: Polypropylene Nail Grips to Seal Bags: YES Additional Tagging Device: NONE Overall Size: 9.25 inch long x .75 inch wide Strap Cross Sectional Area: .075 inch (1.9 mm) diameter Usable Strap Length: 5.0 inch Configuration: Sold in bags of 100 Tightening Tool: NONE, Not Required Removal: Cut with scissors, or break manually Weight: MS-A4: 1.0 lb/bag